SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners
Published by SAE International (SAE)
The CFR incorporates SAE J429 by reference, which makes the edition it names part of the regulation. The CFR requires the edition it names, which may not be the newest. To enforce any other edition, the agency must publish the change in the Federal Register.
The edition the CFR requires
SAE J429 MAY2014, revised May 2014
As the CFR lists it: “SAE J429 MAY2014, Mechanical and Material Requirements for Externally Threaded Fasteners, revised May 2014 (“SAE J429”)”
- Listed in 46 CFR 58.03-1(h)(1); required by46 CFR 58.30-15 ↗
How to read it
- Where to get itSAE standards ↗
A free or purchased copy may not be the edition the CFR names; check it against the edition above. Every incorporated standard can also be inspected at the National Archives (NARA) and at the agency named in the section that lists it.
SAE J429 is copyrighted by its publisher; RegKnot shows its title and the editions the CFR names, not its text. Read from the eCFR's incorporation-by-reference sections, current as of October 26, 2026. The regulation text governs. All standards the CFR requires.