ASTM A276
Standard Specification for Stainless Steel Bars and Shapes
Published by ASTM International (ASTM)
The CFR incorporates ASTM A276 by reference, which makes the edition it names part of the regulation. The CFR requires the edition it names, which may not be the newest. To enforce any other edition, the agency must publish the change in the Federal Register.
The 2 editions the CFR requires
Different parts name different editions; each applies where its part says so. Newest first.
ASTM A276/A276M-17, approved March 15, 2017
As the CFR lists it: “ASTM A276/A276M-17, Standard Specification for Stainless Steel Bars and Shapes, approved March 15, 2017 (“ASTM A276/A276M”)”
- Listed in 46 CFR 56.01-2(c)(9); required by46 CFR 56.60-2 ↗
ASTM A276-08a, approved October 1, 2008
As the CFR lists it: “ASTM A 276-08a, Standard Specification for Stainless Steel Bars and Shapes, (approved October 1, 2008)”
- Listed in 46 CFR 160.133-5(b)(1); required by46 CFR 160.133-7 ↗
- Listed in 46 CFR 160.135-5(b)(2); required by46 CFR 160.135-7
- Listed in 46 CFR 160.156-5(b)(2); required by46 CFR 160.156-7
- Listed in 46 CFR 160.170-5(b)(2); required by46 CFR 160.170-7 ↗
How to read it
- Read it freeASTM Reading Room ↗
Read-only access to the ASTM standards U.S. regulations incorporate by reference, with a free account.
A free or purchased copy may not be the edition the CFR names; check it against the edition above. Every incorporated standard can also be inspected at the National Archives (NARA) and at the agency named in the section that lists it.
ASTM A276 is copyrighted by its publisher; RegKnot shows its title and the editions the CFR names, not its text. Read from the eCFR's incorporation-by-reference sections, current as of October 26, 2026. The regulation text governs. All standards the CFR requires.